GB/T 2093-1993 工业甲酸

作者:标准资料网 时间:2024-05-22 11:04:40   浏览:8356   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:工业甲酸
英文名称:Formic acid for industrial use
中标分类: 化工 >> 有机化工原料 >> 一般有机化工原料
ICS分类: 化工技术 >> 有机化学 >> 有机酸
替代情况:GB 2093-1980;被GB/T 2093-2011代替
发布部门:国家技术监督局
发布日期:1993-06-15
实施日期:1994-04-01
首发日期:1980-12-08
作废日期:2011-11-01
主管部门:中国石油和化学工业协会
归口单位:全国化学标准化技术委员会
起草单位:天津有机合成厂
出版社:中国标准出版社
出版日期:1994-04-01
页数:平装16开, 页数:13, 字数:21千字
适用范围

本标准规定了工业甲酸的技术要求、试验方法、检验规则及标志、包装、运输、贮存等。本标准适用于由发生炉煤气、黄磷尾气的一氧化碳与氢氧化钠合成的工业甲酸。该产品主要用于橡胶、医药、印染、制革等行业。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 有机化工原料 一般有机化工原料 化工技术 有机化学 有机酸
下载地址: 点击此处下载
【英文标准名称】:Aerospaceseries-Cables,electrical,forgeneralpurpose,singleandmulticoreassembly-XLETFEFamily-Jacketedorscreenedandjacketed-Part009:silverplatedcopper-Operatingtemperatures,between-65oCand150oC-Dualextrudedwallforop
【原文标准名称】:航空航天系列.一般用途单芯和多芯装配电缆.XLETFE族.包套或屏蔽和包套.第009部分:工作温度在-65℃至135℃的UV激光打印无屏蔽带有包套的开放式应用的双挤压内壁带有护套无屏蔽镀银铜制电缆.产品标准
【标准号】:NFL52-115-009-2012
【标准状态】:现行
【国别】:法国
【发布日期】:2012-03-01
【实施或试行日期】:2012-03-29
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:航空航天运输;航空运输;共聚物;铜;设计;名称与符号;电缆线;电气工程;标志;材料;多股的;护套的;护套电缆;护壳;镀银;单线的;航天运输;规范(验收)
【英文主题词】:Aerospacetransport;Airtransport;Copolymers;Copper;Design;Designations;Electriccables;Electricalengineering;Marking;Materials;Multi-wire;Sheated;Sheathedcables;Sheathings;Silver-coated;Singlewire;Spacetransport;Specification(approval)
【摘要】:
【中国标准分类号】:K13;V25
【国际标准分类号】:49_060
【页数】:21P;A4
【正文语种】:其他


Product Code:SAE AMS5529
Title:Steel, Corrosion Resistant, Sheet and Strip, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.050 inch (0.038 to 1.27 mm) in nominal thickness.These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 掳F (316 掳C), but usage is not limited to such applications.Strength of these cold-worked products will be impaired if parts are welded during fabrication.ertain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.