Product Code:SAE J469
Title:Zinc Die Casting Alloys
Issuing Committee:Metals Technical Executive Steering Committee
Scope:Because of the drastic chilling involved in die casting and the fact that the solid solubilities of both aluminum and copper in zinc change with temperature, these alloys are subject to some aging changes, one of which is a dimensional change. Both of the alloys undergo a slight shrinkage after casting, which at room temperature is about two-thirds complete in five weeks. It is possible to accelerate this shrinkage by a stabilizing anneal, after which no further changes occur. The recommended stabilizing anneal is 3 to 6 h at 100 掳C (212 掳F), or 5 to 10 h at 85 掳C (185 掳F), or 10 to 20 h at 70 掳C (158 掳F). The time in each case is measured from the time at which the castings reach the annealing temperature. The parts may be air cooled after annealing. Such a treatment will cause a shrinkage (0.0004 in per in) of about two-thirds of the total, and the remaining shrinkage will occur at room temperature during the subsequent few weeks. Stabilizing results in a decrease in dimensions of about 0.0005 in per in from the original size of the casting. Stabilizing is, of course, unnecessary if the machine or fitting operations can be delayed until the castings have aged five weeks at room temperature.ns of about 0.0005 in per in from the original size of the casting. Stabilizing is, of course, unnecessary if the machine or fitting operations can be delayed until the castings have aged five weeks at room temperature.【英文标准名称】:Smalltransformersandchokes;strip-woundcutcores;technicalconditionsofdeliveryforthreephaseapplications;typeS3U
【原文标准名称】:小型变压器；变换器.互感器和电抗器；带式卷绕铁芯；三相铁芯交货技术条件；S3U型
【标准号】:DIN41309-3-1985
【标准状态】:作废
【国别】:德国
【发布日期】:1985-07
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:特性;验收规范;小功率变压器;额定值;带绕截割铁芯;检验;电气工程;电气元件;磁芯;规范(审批);C形铁芯
【英文主题词】:small-powertransformers;stripwoundcutcores;electricalcomponents;inspection;properties;acceptancespecification;ratings;specification(approval);electricalengineering;magneticcores;c-cores
【摘要】:
【中国标准分类号】:K41
【国际标准分类号】:29_180;29_100_10
【页数】:4P;A4
【正文语种】:德语